Cooling

This spray mist unit has a 1/4 NPT thread for your compressed air supply. (You furnish the air compressor.)

Includes:

The Spra-Kool Midge unit has successfully been used for over 30 years as a versatile, economical method of applying a coolant spray for machining. The Spra-Kool unit works on 30 to 150 PSI air pressure. (You furnish the air compressor.)

Simply attach the ball-check fitting to the air supply, drop the suction tube into a coolant container, and locate the nozzle by means of the spring-wire attaching clip. The soft wire in the nose can be bent to direct the spray to the work. It is designed for easy transfer from one machine to another. The coolant container can be anything, such as a plastic bottle or a coffee can. It takes only seconds to locate and set the nozzle for full coverage of any area. Slight adjustment of the control valve permits regulating the volume from a fine mist to a heavy, wet spray.

Only solid brass fittings are used. There is nothing to rust or corrode. The system is suitable for use with any type of soluble coolant or oil.

Features: