You are here
› MillingMilling
 End Mill Adapter (MT3) End Mill Adapter (MT3)These end mill adapters are the most secure way to hold your end mill. Bored to accept the exact shaft size of the end mill and secured with a set screw, end mills won't move or flex during your milling operation.
|  End Mill Adapter (R8) End Mill Adapter (R8)These end mill adapters are the most secure way to hold your end mill. Bored to accept the exact shaft size of the end mill and secured with a set screw, end mills won't move or flex during your milling operation.
|  Drawbars DrawbarsPull collets and adapters up into your millhead spindle with these drawbars.
|  Face Mill Cutter Face Mill CutterMill large, flat surfaces quickly and accurately with this cutter. Easier to use than a fly-tool cutter, it's shank fastens to the millhead drawbar. Includes three indexable inserts and screws.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 End Mill 4 Flutes HSS End Mill 4 Flutes HSSAll the basics you need.
|  MT3 Collets MT3 ColletsPull these collets up into your millhead spindle with a drawbar. As the collet pulls up, it tightens around the piece you're mounting. Use with 3/8” drawbar. Item K99-270 Collet Kit includes all listed collets.
|  MT3 Collet Set Product Code: K99-273 SALE $149.95 Quantity: Availability: In Stock Set of eleven 3 Morse taper round collets. Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", and 3/4".
|  End Mill Set, 4-Fluted TiN - 10-piece Set Product Code: 57-470 SALE $89.25 Quantity: Availability: In Stock Plunge cut and take larger cuts with these center cutting Tin-coated, single end mills. These long-lasting sets contain sizes: 3/16”, 1/4”, 5/16”, 3/8”, and 7/16” with 3/8” shanks; 1/2” and 9/16” with 1/2” shanks; 5/8” and 11/16” with 5/8” shanks; and 3/4” with a 3/4” shank.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 R-8 Collet R-8 ColletThese collets mount and center tools quickly. Tooling ends have a shaft keyway and flare to center the collet in the quill. Use collets with 7/16” drawbar. Kit includes one of each size.
| R-8 Collet Kit Product Code: K99-260 KIT SALE $79.25 Quantity: Availability: In Stock These collets mount and center tools quickly. Tooling ends have a shaft keyway and flare to center the collet in the quill. Use collets with 7/16” drawbar. Kit includes one of each size.
|  End Mill Set, 2 & 4 Fluted TiN - 20-piece Set Product Code: 57-370 SALE $152.99 Quantity: Availability: In Stock The size you need is close at hand with this set of two- and four-fluted end mills. Includes sizes 3/16”, 1/4”, 5/16”, 3/8”, and 7/16” (3/8” shank); 1/2” and 9/16” (1/2” shank); 5/8” and 11/16” (5/8” Shank), and 3/4" (3/4" shank), all in a wooden case.
|  Quick Change Tooling Quick Change ToolingUse with a standard R8 3/4" collet for quick tool changes. Tool holders are designed to "bottom out" on the face of the R8 spindle, giving you a fixed height each time.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Double-Ended End Mill Set Product Code: 57-420 SALE $49.56 Quantity: Availability: In Stock Save money with this set of four-fluted HSS end mills. This set of 3/8” shank end mills includes: 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, and 3/8”
|  Roughing End Mill Set Up - 4-piece Product Code: 57-430 SALE $72.99 Quantity: Availability: In Stock This 4-piece roughing end mill set lets you remove material quickly and effortlessly. Set includes 1/4”, 5/16”, 3/8” and 1/2” end mills with wooden stand.
|  Fly Tool Cutter Kit Product Code: K99-140 SALE $39.99 Quantity: Availability: In Stock Cut flat surfaces in a path up to 4” wide with these counterbalanced cutters. Cutter heads are hardened steel with 1/2” shanks. Includes body sizes 1-1/16”, 1” and 1-3/8” plus tool bits. MT3 spindles (Midas Series) require adapter #65-015. R-8 spindles (Granite, Granite Industrial, CX and LX) require R-8 collet, item #66-260.
|  Fly Tool Cutter Replacement Bits Fly Tool Cutter Replacement BitsCreate just the bit you need with these blanks. Bits can be shaped and sharpened easily on almost any grinder. The HSS bits work best on aluminum, brass, iron, plastic, and wood. Upgrade to the 5% cobalt bits when more heat is present, such as when you are cutting harder materials or want to take deeper cuts.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Saw Arbor Product Code: 65-055 SALE $42.65 Quantity: Availability: In Stock Mount a side cutter or slitting saw in your R-8 millhead with this arbor. Precision-ground and hardened, this arbor features a R-8 shank, four T-Spacers (1”,1/2”, and 2 1/4”) to adjust blade depth, and a locking nut with reverse threads to lock the cutter. 1" Diameter. For use with machines that have an R-8 mill spindle.
|  End Mill Set - 4-Fluted HSS Product Code: 57-400 SALE $44.55 Quantity: Availability: In Stock This versatile set has all the most popular sizes, including 1/8”, 3/16”, 1/4”, 5/16” and 3/8” sizes with 3/8” shanks, and 1/2” with a 1/2” shank.
|  R-8/MT3 Adapter Sleeve Product Code: 65-060 SALE $17.99 Quantity: Availability: In Stock Use this adapter sleeve to hold large capacity MT3 taper shank drills in your R-8 taper mill/drill machine.
|  Slit Cutter, 4” x 1/16” with 1” Hole Product Code: 58-500 SALE $29.65 Quantity: Availability: In Stock Machine slots, keyways, and splines in large gears with this 4 x 1/16” HSS cutter. Ideal for general-purpose slotting and cut-off operations, this 36-tooth cutter fits Saw Arbor #65-055 for the machines with an R-8 Spindle. Use stub arbor, 65-075 for machines with an MT3 spindle.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Milling Stub Arbor with 3/4” Shank Product Code: 65-075 SALE $78.99 Quantity: Availability: In Stock Use this 3/4” shank stub mill arbor to hold small cutters and slitting saws in your machine. Ideal for Midas machines where a standard MT3 saw arbor is not available. Simply mount the arbor into a MT3 3/4” end mill adapter (65-025). Hardened and ground. Accepts tooling with a 1” inside diameter keyed hole.
|  Spring Collet Set Spring Collet SetRun spring collets in the millhead, tailstock, or headstock of your Midas series machine. Insert a spring collet and tighten with the safety wrench. Chuck holder head is 3” long and 2-1/2” in diameter. Set includes collet chuck with MT3 shank, 15 spring collets (1/8-1”), and a safety wrench. Requires 7/16” drawbar.
|  Face Mill Replacement Screw Face Mill Replacement ScrewScrew secures face mill insert in place. Two styles available. Tapered cap screw 68-017 fits 68-010 face mill cutter (68-010 face face mill cutter has an MT3 shank), setscrew 68-018 shown above fits 68-080 (R8 taper shank).
|  R8 Collet Rack Product Code: 66-702 SALE $15.95 Quantity: Availability: In Stock Stay organized with this hanging collet rack. With holes for eight collets, this rack can either hang on your wall or mount to your workbench. 5C Collet rack shown. R8 rack holds 12 collets.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 MI-329M Powerfeed Product Code: 82-075 SALE $320.00 Quantity: Availability: Backorder This customer installed powerfeed drives the MI's X-axis for fine finishes. Features variable speeds with high-speed override and limit switches. Check with a service technician about compatibility if you already own a MI.
|  End Mill Set Miniature - 10 pieces, 2 & 4 Flute Product Code: 57-415 SALE $60.45 Quantity: Availability: In Stock none
|  Collet Block Set - Hex and Square Product Code: 66-018 SALE $75.50 Quantity: Availability: In Stock Holds standard 5C collets, economical indexing for 2, 3, 4, and 6 divisions, and easy cross drilling at 60°, 90° and 120°. Made of hardened tool steel. Ground square and parallel within 0.0005".
|  Dovetail Cutter Dovetail CutterHigh speed steel cutter
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Indexable End Mill - R8 Product Code: 68-058 SALE $62.00 Quantity: Availability: In Stock This Indexable End Mill has a 1.25" cutting diameter. It has an R8 shank and comes with one set of inserts.
|  TPG322 Carbide Insert Product Code: 68-051 SALE $3.25 Quantity: Availability: In Stock These TPG322 carbide inserts fit the R8 indexable mill cutter. The indexable end mills require two inserts.
|  Indexable End Mill - MT3 Product Code: 68-053 SALE $69.25 Quantity: Availability: In Stock This Indexable End Mill has a 30 mm (1.18") cutting diameter. It has a 3 Morse taper shank and 3/8"-16 thread for the drawbar. It comes with one set of inserts. The Indexable End Mill uses TPCN1603PDR inserts.
| TPCN322 Carbide Insert (for MT3 Indexable Cutter) Product Code: 68-054 SALE $11.25 Quantity: Availability: In Stock These carbide inserts fit the MT3 Indexable Cutters. These indexable end mills require two inserts. These are TPCN1603PDR inserts, also called TPCN-160308.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 MT3 End Mill Holder Set Product Code: K99-653 SALE $115.45 Quantity: Availability: In Stock The 5-piece end mill holder set includes adapters for end mills with shank diameters of 3/16, 3/8, 1/2, 5/8, and 3/4 inches. This end mill holder works with the mill with a 3 Morse taper spindle and other mills with a 3 Morse taper spindle. The drawbar thread is 3/8-16 NC.
|  Face Mill Insert Product Code: 68-015 SALE $8.75 Quantity: Availability: In Stock This C6 Carbide inserts fit Smithy face mill cutters 68-010 and 68-080. Technical reference number SPG 422. Note: Pricing is for one insert.
|  Ball Nose End Mill Kit, 2 Flutes HSS Product Code: 57-200 SALE $89.79 Quantity: Availability: In Stock Ball endmills are used when you want to cut a rounded groove. Great for die makers. This set includes 1/8”, 3/16”, 1/4”, 5/16”, and 3/8” sizes, with 3/8” shanks; 7/16”, 1/2”, and 5/8” with 1/2” shanks; and 3/4” with a 3/4” shank.
|
Lathes and Mills
Promo
FREE Shipping
and
FREE Delivery!
and
FREE Delivery!
on select Smithy 3-in-1s
TOTAL SAVINGS:
up to $2,174.23!
up to $2,174.23!
- GRANITE Lathe⋅Mill⋅Drill
- June Savings- FREE Shipping and FREE Delivery! *On select 3-in-1 Combo Machines*
- Free Quick-Start Tool Pack
Worth up to $1,045.23 - Easy Financing
Get it now and make easy monthly payments - 30-Day Trial Guarantee
Try it for 30 days with no risk!
Smithy Accessories
- Designed
- Built
- Tested
- Assured
Buy with confidence -
Smithy Tooling is
quality-built to match the
needs of small shop machinists.
Smithy Tooling is
quality-built to match the
needs of small shop machinists.
