You are here
› TurningTurning
 5C Collet Kit (Granite 1300 Series D1-4) 5C Collet KitAll you need to set up with collets. This 5C Collet Kit is perfect for machinist who demand higher precision. The scrolling 5C Collet Chuck secures the 5C collet in place and allows the operator to easily change out collets. includes 8 collets (3/16" thru 1"), collet stop, 5C scrolling chuck, chuck key and collet rack. Granite series shown.
|  3/16” HSS Square Bit Blank BitsCreate just the bit you need with these blanks. Bits can be shaped and sharpened easily on almost any grinder. The HSS bits work best on aluminum, brass, iron, plastic, and wood. Upgrade to the 5% cobalt bits when more heat is present such as when you are cutting harder materials or want to take deeper cuts.
|  Quick Change Tool post (1220 Series) Quick Change Tool postChange holders in the blink of an eye and get on dead center effortlessly with this maintenance-free wedge-type toolpost. All working parts are hardened and ground. Tool holders are interchange with Aloris toolposts. Toolpost includes six pieces: A. Turning and facing holder - Accommodates various bit sizes and tools. B. Boring, Turning, and facing holder - features V-groove for round 1/2”- shank boring bars and tools as well as square tool bits. C. Heavy-duty boring-bar holder with a split brushing - Accepts 5/8" and 3/4” diameter boring bars, grips with rigidity, and cuts smoothly. D. Universal parting blade holder - Use for bevel and T-cut blades to get close cutoffs to the chuck. *blade not included. E. Knurling holder - Includes a set of high-speed, precision-ground, lapped, medium diamond knurls 3/4" x 3/8" x 3/4”
|  5 PC Carbide Bit Set (Includes 1 each AR8, BR8, AL8, BL8 and E8) Carbide Lathe BitsTurn at higher speeds with these carbide tipped tool bits. While superior for high heat and high speeds, carbide is more brittle and must have adequate support in your toolpost. 1/2” or 7/16" Shank.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 8” Face Plate (All 1220 Series) Face Plate KitsMount irregular shaped pieces to this face plate with your clamp set or 7/16” t-nuts for facing and boring operations. This is the most accurate way to bore single cylinder engines with your lathe.
|  Heavy Duty Cut-Off Tool Heavy Duty Cut-Off ToolThese 1/2” straight-shank tools are drop forged, heat-treated, and built for Smithy toolposts. Machined to precise tolerance, overall length is 5” and comes with holder, blade and wrench.
|  1/8” Countersink Drill Countersink DrillsDrill center holes in the ends of stock before setting up between centers. These self-centering HSS tools have 60 degree angles to match the lathe centers.
|  1-1/4” Lathe Dog Lathe DogsYou need these dogs and a faceplate. Securely mount workpiece with square head screw. Generic dogs, tail needs to be ground to fit faceplate slots.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Planetary Pulley (MI-1220) Speed Reduction PulleyA thread cutting necessity, this pulley slows down your spindle speed allowing you to cut at slower speeds without losing torque. This pulley reduces the speed range on the 1220 machines by 50% on the dual belt low speed ranges only. Note: Replaces the current lathe idler pulley.
|  MT3 Dead Center Dead CenterSupport the tailstock end of your workpiece with this hardened and ground dead center. Carbide tipped, this dead center requires lubrication.
|  MT2 to MT2 Extension Socket Extension SocketUse this extension to give yourself some breathing room on the tailstock end of the lathe. If you are working with small lengths, you can use the extension socket to extend your tailstock set-up. This hardened steel socket with tang will add 3-1/2” to your set-up.
|  Boring Bar Insert Replacement Screw Boring Bar Insert Replacement ScrewDon't worry we have all misplaced or dropped the screw as we were securing in the bit. Don't bother crawling on the floor just keep a few extra on hand. Replacement screw 47-511 fits with 1/2" boring bar. 44-021 fits with 5/8" boring bar and replacement screw 47-510 fits with the mini boring bar.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Compound Angle Toolpost (Metric) 1220 Series Machines Compound Angle ToolpostCut angles and tapers with this versatile toolpost. Rotates 360° and holds cutters with shanks up to 1/2". Four position turret allows for multiple tool mounts.
|  Quick Change Toolpost Adapter Bolt (Chicago Bolt-Granite 1300 Series) Quick Change Toolpost Adapter Bolt (Chicago-Bolt)This Chicago bolt secures the body of your quick change toolpost to your compound angle toolpost base. The hollow bolt with internal threads, slips into the body of your compound angle toolpost and fastens to the post of the compound angle toolpost. This part is included with the purchase of a Smithy Quick Change Toolpst
|  Steady Rest & Follow Rest Kit (Granite 1300 Series) 3-Jaw ChucksCut thin or long workpieces with these rests. Steady rests support work extending beyond the bed and clamps to the ways. Follow rest mounts directly to the carriage opposite the tool bit to keep your work piece from flexing when the tool bit contacts it.
|  3/16” 5C Round Collet Steady Rest & Follow Restnone
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Cut-Off Blade (Quick Change Toolpost) Product Code: 75-001 SALE $9.79 Quantity: Availability: In Stock If you are cutting a lot of groves or parting off, keep an extra blade or two on hand. Replacement blade for the quick change toolpost is 1/2” x 3/32” x 4-1/2”.
|  Self-Ejecting Lathe Key Product Code: 40-000 SALE $17.99 Quantity: Availability: In Stock Set up your work quickly and safely with this self-ejecting chuck key. This keys 3/8" shank fits Smithy three and four jaw chucks.
|  6” Independent 4-Jaw Chuck (All 1220 Series) 5C ColletWhen accuracy is critical with round, square, rectangular, or irregular work pieces, use this chuck. The hardened steel jaws adjust separately to center precisely and are reversible. Includes backplate for 1220 series.
|  6" 6-Jaw Chuck (Granite 1300 Series D1-4) Product Code: K99-104 SALE $399.00 Quantity: Availability: In Stock 6-Jaw Chucks are scrolling self-centering chucks that allow for micro adjustments in four positions. This allows you to achieve a more accurate set-up. The six jaws provide a firm hold with less total pressure applied to your workpiece, no need for lathe collets. Jaws are hardened two piece set, easy to reverse and set-up. Minimum Holding: 1/8" Maximum Holding: 6"
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Taper Attachment for LZ-1340 Product Code: 41-000 SALE $529.00 Quantity: Availability: Backorder Want to cut tapers on your LZ-1340? While you can cut tapers with your compound angle toolpost, we recommend this telescoping taper attachment to eliminate the guess work. Set th angle of the taper or the taper in inches per foot, crank your long feed handle the length of your taper, and repeat until your have reached the desired beginning and end diameters. Cuts continuous tapers up to 10". Excellent for boring internal tapers or making duplicates.
|  MT3 Half Center Product Code: 41-013 SALE $29.99 Quantity: Availability: In Stock Face the tailstock end of your workpiece with this half-center while keeping the support you'd get from a dead center. Half center requires lubrication.
|  MT3 Live Center Product Code: 41-103 SALE $38.79 Quantity: Availability: In Stock Turn easily without lubrication with this #1 lathe accessory. Bearings allow its 60° point to rotate with the workpiece. Run out is guaranteed within 0.0004". Note: Included with IMAX Series.
|  MT3 Bullnose Center Product Code: 41-303 SALE $120.65 Quantity: Availability: In Stock Cut or turn pipes and other hollow shafts, including pvc, with this MT3 bell-nose live center. The 3” head is built to last and the entire center is 6-1/2” long.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 MT4/MT3 Adapter Sleeve with Tang Product Code: 42-004 SALE $9.95 Quantity: Availability: In Stock If you want to put MT3 lathe centers in the MT4 spindle, you need this adapter sleeve.
|  Indexable Tool Set 4-Jaw ChucksSave time and money with these 3-sided cutters. When one side dulls, just rotate to the next. There's no regrinding. Set includes one AR, AL, BR, BL, and E (with 1/2” shanks) plus 10 each of throwaway carbide inserts, extra screws, hex wrenches, and a wooden storage case. Replacement inserts fit all holders.
|  C6 Carbide Indexable Tool SetWith indexable carbide inserts you always have a sharp edge. Rotate the bit when the cutting side dulls, no regrinding. Available in C6 Carbide and TiN coated carbide. Insert technical reference number: TCMT-16T308.
|  Woodworking Tool Rest Product Code: 45-170 SALE $24.95 Quantity: Availability: In Stock Work wood on a metal lathe. This 8" toolrest adjust three ways for consistent, accurate cuts and attaches to your Smithy with the standard 7/16" t-slot nut. Its bevel design allows scraping and shearing. Remember good clean-up is a must--we warned you.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 5C Collet Stopper Product Code: 67-001 SALE $10.95 Quantity: Availability: In Stock Set your work piece at the same depth each time with this collet stop. Designed for 5C collets, with internal threads, this stop with it's hardened finish is hex-milled for use with a box or open ended wrench.
|  Expanding Mandrel Set Product Code: 69-000 SALE $61.25 Quantity: Availability: In Stock A perfect fit when you need to machine a job in relation to an existing hole (like gears). Mandrels fit into the hole, expand, and tighten. Mount the shaft end into a mill or lathe spindle. Set includes eight mandrels ¼-1-1/4”, hex wrenches, and a wood holder.
|  Ball Turning Attachment Product Code: 43-100 SALE $52.75 Quantity: Availability: Backorder This attachment allows you to turn balls on the mini lathe. The tool will cut convex curves up to 2" in diameter. Includes one pre-sharpened tool bit. You must make a mounting block for the ball turning attachment.
|  Knurling Tool Product Code: 76-000 SALE $16.79 Quantity: Availability: In Stock Add an attractive diamond pattern and a good grip to your projects at the same time. This knurling tool mounts into toolposts that accept 1/2" shanks.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Large Capacity Knurler Product Code: 76-100 SALE $65.25 Quantity: Availability: In Stock This scissors knurler is made specifically for the mini lathe. This knurler fits in the standard tool post of the mini lathe without any modification. It also works with any of the quick change tool posts we sell. It comes with fine (33 lines per inch), medium (21 lines per inch), and coarse (14 lines per inch) diamond knurls.
|  5C Spin Indexer Product Code: 67-050 SALE $65.00 Quantity: Availability: In Stock The 5C Spin Indexer is a quick, simple and accurate device for mill work. Mount your workpiece in the 5C Collet and thread it into the indexer. Great for miniature work such as clock gears. Comes complete with precision ground, 36-position index plate, calibrated in 1 degree increments. 5C collet not included.
|
-
GRANITE COMBO
- SMITHY SUPER LOCK VISE is our best milling vise.
- SMITHY LATHE PAK makes tight tolerance. clean-as-a-whistle threading EASY.
- SMITHY REFERENCE MATERIALS give you tricks 'n tips to get you started.
