CNC Lathe Accessories

HANDWHEEL

PROBE WITH TOOL SETTER

A handy tool for setting thread-cutting tools and measuring tools. Align the 60° point, or one of the three 60° notches, to your tool bit to assure correct cutting angle and accuracy. This gauge also has etched graduations in 14ths, 20ths, 24ths and 32nds for determining number of threads per inch.

If you need to measure a thread pitch on an existing piece or check your threading skills, this is your tool. Line up the piece you are checking with the appropriate thread pitch blade and it's that simple. Gauges have 30 blades, each with a different thread pitch. Inch gauge measures pitches from 4 to 40 and the metric gauge measures pitches from .25 to 3.00 mm.

If you need to measure a thread pitch on an existing piece or check your threading skills, this is your tool. Line up the piece you are checking with the appropriate thread pitch blade and it's that simple. Gauges have 30 blades, each with a different thread pitch. Inch gauge measures pitches from 4 to 40 and the metric gauge measures pitches from .25 to 3.00 mm.

Before making a line to lay out your work, brush this highly-visible blue ink on your workpiece. Let dry, then use a scriber to mark the layout lines on your work. The lines scribed in ink are easier to see than lines scratched into metal, and it's easier to remove layout ink from parts by washing in solvent or using Dykem remover than it is to polish outlines scribed in metal. 8 oz with brush in cap.

This scriber's tungsten carbide tip will scratch lines in most metals - even hardened tool steel - and is the perfect tool for scribing lines in layout ink.

Dial indicators are essential for accurate machining. Use this dial indicator with 0.001" graduations to position or align workpieces before machining. Equipped with rotating face (bezel), bezel lock, and clamp to easily attach to Smithy's magnetic base, 20-000.

This magnetic base accepts Smithy's dial indicator 19-000. Convenient magnetic on/off switch allows you to position the base where you want and then secure it in place. V-groove easily mounts on cylindrical pieces.

The dial test indicator is much more accurate than a dial indicator, but over a much smaller range of travel. It measures to 0.0005” but travels only 0.030” (I 0.015 from the zero point). The tip rotates a total of 2400 (120º I) for flexible setup. Useful for turning and milling operation. Includes fitted case and two clamping rods.

All you need to set up with collets. This 5C Collet Kit is perfect for machinists who demand higher precision. The scrolling 5C Collet Chuck secures the 5C collet in place and allows the operator to easily change out collets. includes 8 collets (3/16" thru 1"), collet stop, 5C scrolling chuck, chuck key and collet rack. Granite series shown.

Save time and money with these 3-sided cutters. When one side dulls, just rotate to the next. There's no regrinding. Set includes one AR, AL, BR, BL, and E (with 1/2” shanks), plus 10 each of throwaway carbide inserts, extra screws, hex wrenches, and a wooden storage case. Replacement inserts fit all holders.

This insert fits either the 44-020 indexable tool set or the 5/8" boring bar. Insert technical reference number: TCMT-16T308

With indexable carbide inserts, you always have a sharp edge. Rotate the bit when the cutting side dulls - no need for regrinding. Available in C6 Carbide and TiN-coated carbide. Insert technical reference number: TCMT-16T308.

These 1/2” straight-shank tools are drop-forged, heat-treated, and built for Smithy toolposts. Machined to precise tolerance, overall length is 5” and comes with holder, blade and wrench.

These 1/2” straight-shank tools are drop-forged, heat-treated, and built for Smithy toolposts. Machined to precise tolerance, overall length is 5” and comes with holder, blade and wrench.

Add an attractive diamond pattern and a good grip to your projects at the same time. This knurling tool mounts into toolposts that accept 1/2" shanks.

Turn easily without lubrication with this #1 lathe accessory. Bearings allow its 60° point to rotate with the workpiece. Run out is guaranteed within 0.0004".
Note: Included with I-MAX Series.

Create just the bit you need with these blanks. Bits can be shaped and sharpened easily on almost any grinder. The HSS bits work best on aluminum, brass, iron, plastic, and wood. Upgrade to the 5% cobalt bits when more heat is present, such as when you are cutting harder materials or want to take deeper cuts.

Save time and money with these 3-sided cutters. When one side dulls, just rotate to the next. There's no regrinding. Set includes one AR, AL, BR, BL, and E (with 1/2” shanks) plus 10 each of throwaway carbide inserts, extra screws, hex wrenches, and a wooden storage case. Replacement inserts fit all holders.

Create just the bit you need with these blanks. Bits can be shaped and sharpened easily on almost any grinder. The HSS bits work best on aluminum, brass, iron, plastic, and wood. Upgrade to the 5% cobalt bits when more heat is present, such as when you are cutting harder materials or want to take deeper cuts.

Turn at higher speeds with these carbide-tipped tool bits. While superior for high heat and high speeds, carbide is more brittle and must have adequate support in your toolpost. 1/2” or 7/16" Shank.

Turn at higher speeds with these carbide-tipped tool bits. While superior for high heat and high speeds, carbide is more brittle and must have adequate support in your toolpost. 1/2” or 7/16" Shank.

Use this extension to give yourself some breathing room on the tailstock end of the lathe. If you are working with small lengths, you can use the extension socket to extend your tailstock set-up. This hardened steel socket with tang will add 3-1/2” to your set-up.

none

Set your work piece at the same depth each time with this collet stop. Designed for 5C collets, with internal threads, this stop with it's hardened finish is hex-milled for use with a box or open-ended wrench.

none

none

none

none

none

none

none

RACK, 5C COLLET

Turn at higher speeds with these carbide-tipped tool bits. While superior for high heat and high speeds, carbide is more brittle and must have adequate support in your toolpost. 1/2” or 7/16" Shank.

none

Turn at higher speeds with these carbide-tipped tool bits. While superior for high heat and high speeds, carbide is more brittle and must have adequate support in your toolpost. 1/2” or 7/16" Shank.

Create the bit you need with these blanks. Bits can be shaped and sharpened easily on almost any grinder. The HSS bits work best on aluminum, brass, iron, plastic, and wood. Upgrade to the 5% cobalt bits when more heat is present, such as when you are cutting harder materials or want to take deeper cuts.

Create just the bit you need with these blanks. Bits can be shaped and sharpened easily on almost any grinder. The HSS bits work best on aluminum, brass, iron, plastic, and wood. Upgrade to the 5% cobalt bits when more heat is present such as when you are cutting harder materials or want to take deeper cuts.

Create the bit you need with these blanks. Bits can be shaped and sharpened easily on almost any grinder. The HSS bits work best on aluminum, brass, iron, plastic, and wood. Upgrade to the 5% cobalt bits when more heat is present such as when you are cutting harder materials or want to take deeper cuts.

Turn at higher speeds with these carbide-tipped tool bits. While superior for high heat and high speeds, carbide is more brittle and must have adequate support in your toolpost. 1/2” or 7/16" Shank.

Cut or turn pipes and other hollow shafts, including PVC, with this MT3 bell-nose live center. The 3” head is built to last and the entire center is 6-1/2” long.

If you want to put MT3 lathe centers in the MT4 spindle, you need this adapter sleeve.

Cut flat surfaces in a path up to 4” wide with these counterbalanced cutters. Cutter heads are hardened steel with 1/2” shanks. Includes body sizes 1-1/16”, 1” and 1-3/8” plus tool bits. MT3 spindles (Midas Series) require adapter #65-015. R-8 spindles (Granite, Granite Industrial, CX and LX) require R-8 collet, item #66-260.

Create just the bit you need with these blanks. Bits can be shaped and sharpened easily on almost any grinder. The HSS bits work best on aluminum, brass, iron, plastic, and wood. Upgrade to the 5% cobalt bits when more heat is present such as when you are cutting harder materials or want to take deeper cuts.

Create the bit you need with these blanks. Bits can be shaped and sharpened easily on almost any grinder. The HSS bits work best on aluminum, brass, iron, plastic, and wood. Upgrade to the 5% cobalt bits when more heat is present such as when you are cutting harder materials or want to take deeper cuts.

Turn at higher speeds with these carbide-tipped tool bits. While superior for high heat and high speeds, carbide is more brittle and must have adequate support in your toolpost. 1/2” or 7/16" Shank.

Turn at higher speeds with these carbide-tipped tool bits. While superior for high heat and high speeds, carbide is more brittle and must have adequate support in your toolpost. 1/2” or 7/16" Shank.

Cut internal and external threads with this tool holder, or use it as a boring bar. The 5/8” shank works with the Smithy Boring Bar Holder (47-520) or the Smithy Quick Change Toolpost. 6” Overall length. Complete with the indexable threading insert (47-516) and 3/8” IC cutting insert (44-030). Minimum bore is 0.64”

Finish-bore a precise hole with a boring bar. Bars mount securely in the Smithy Boring Bar Holder. 5/8" Also fits in the Smithy Quick Change Toolpost. 1/2" and 5/8" available. 1/2" boring bar accepts insert 47-510 and 5/8" accepts 44-030.

Use this TiN-coated insert with boring bar 47-515 to cut external and internal threads. 3/8" IC and will cut thread pitches 8 to 48 TPI. Technical Reference Number is 16 IL AG60.

Choose the right insert for your Smithy Boring Bar. Insert reference numbers: 47-510 for 1/2" Boring Bar is TPMR-730. 47-553 for Mini Boring Bar is TCMT-520. 44-030 for 5/8" Boring Bar is TCMT-16T308

Choose from two boring bar kits. Both come complete with a TiN coated insert and custom-fitted boring bar holder that mounts into the Smithy Compound Angle Toolpost. Boring bar holder holds bars with 1/2" and 5/8" shafts. 5/8" tool bar also fits the Smithy Quick Change Toolpost.

BORING BAR, MINI

Bore holes as small as 0.286” with Smithy's mini boring bar. This insert fits the bar supplied in our K99-115 KIT.

Bore holes as small as 0.286” with Smithy's mini boring bar. The 1/2” shank narrows to 1/4”. Carbide Insert and torx key included.

It never hurts to have an extra key around, just in case you misplace one.

Bore holes as small as 0.286” with Smithy's mini boring bar. The 1/2” shank narrows to 1/4”. Carbide Insert and torx key included.

COOLANT, SYNTHETIC OIL

Keep closer tolerances, get finer finishes and increase production and tool life while reducing costs. Ideal for all metals. One pint.