CNC Mill Accessories - Click each category for accessory details

HANDWHEEL

Can be used with 4th axis control. 8" model built with stepper motor control (8”model for CNC 1240; 4” model for CNC 622). Gears are adjustable to remove backlash. A controller and cable is not included with this table. 70 lbs. Tailstock can be used to support horizontal work.

CNC ROTARY TABLE 4" W/

PROBE WITH TOOL SETTER

Before making a line to lay out your work, brush this highly-visible blue ink on your workpiece. Then use a scriber to mark the layout lines on your work. The lines scribed in ink are easier to see than lines scratched into metal, and it's easier to remove layout ink from parts by washing in solvent or using Dykem remover than it is to polish outlines scribed in metal. 8 oz with brush in cap.

Dial indicators are essential for accurate machining. Use this dial indicator with 0.001" graduations to position or align workpieces before machining. Equipped with rotating face (bezel), bezel lock, and clamp to easily attach to Smithy's magnetic base 20-000.

This magnetic base accepts Smithy's dial indicator 19-000. Convenient magnetic on/off switch allows you to position the base where you want and then secure it in place. V-groove easily mounts on cylindrical pieces.

Use this indicator to quickly center work pieces or fixtures on your mill. The measuring range is 0.25". The shank is 0.375" diameter and 0.75" long. The indicator is 5.5" long from the top of the shank to the bottom of the tip holder (the black part). Can measure internal diameters from 0.12" to 4.25" and external diameters from zero to 4.25". This set includes: Indicator body, restraining rod (prevents rotation), spring-loaded center point feeler, three straight feelers (for IDs), three curved feelers (for ODs).

The dial test indicator is much more accurate than a dial indicator, but over a much smaller range of travel. It measures to 0.0005” but travels only 0.030” (I 0.015 from the zero point). The tip rotates a total of 2400 (120º I) for flexible setup. Useful for turning and milling operation. Includes fitted case and two clamping rods.

It doesn't get easier then this! With traditional edge and center finders you need to back off from the original point and calculate the beginning point or the center point, not any more. With the Laser Edge finder, simply chuck it up and align the laser with center punch mark or the edge of your workpiece or holding device. It can also be used in the lathe tailstock to align work in the 4 jaw chuck or to re-align the lathe tailstock after cutting a taper.

You'll have the perfect size parallels for every job with this set. Six adjsutable pairs range from 3/8" to 2-1/4" wide, 1-3/4" to 5" long. Adjust to measurement with lock down and setscrew.

The size you need is close at hand with this set of two and four-fluted end mills. Includes sizes 3/16”, 1/4”, 5/16”, 3/8”, and 7/16” (3/8” shank); 1/2” and 9/16” (1/2” shank); 5/8” and 11/16” (5/8” Shank), and 3/4" (3/4" shank) all in a wooden case.

Made in the USA by hungry machinists. This 3/8" diameter combination edge and center finder helps you locate work on your mill. The edge finder end has a 0.200" diameter cylinder to quickly find the edge of a work piece. The center finder end tapers to a point to locate holes. The edge and center finder is hardened and ground all over. The edge and center finder is furnished with a quality vinyl case. This is a quality American-made product from Fisher Machine Shop.

Boost your work up in the vise while keeping absolute flatness with these precision-ground and hardened parallels. All are 5/32" thick, 3" long and include widths of 1/2", 5/8", 3/4" and 7/8".

This versatile set has all the most popular sizes including 1/8”, 3/16”, 1/4”, 5/16” and 3/8” sizes with 3/8” shanks and 1/2” with a 1/2” shank.

Ten piece angle block set. The angles included are 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30°. You can combine them to make any integral angle.

Plunge cut and take larger cuts with these center cutting Tin-coated, single end mills. These long-lasting sets contain sizes: 3/16”, 1/4”, 5/16”, 3/8”, and 7/16” with 3/8” shanks; 1/2” and 9/16” with 1/2” shanks; 5/8” and 11/16” with 5/8” shanks; and 3/4” with a 3/4” shank.

All the basics you need.

For accurately locating working points on the drill press and the milling machine, you can't beat this set. Includes indicator holder, ball contact (0.250"), disc contact (0.100"), needle point shaft and wiggler body. Protected in vinyl case.

It doesn't get easier then this! With traditional edge and center finders you need to back off from the original point and calculate the beginning point or the center point, not any more. With the Laser Edge finder, simply chuck it up and align the laser with center punch mark or the edge of your workpiece or holding device. It can also be used in the lathe tailstock to align work in the 4 jaw chuck or to re-align the lathe tailstock after cutting a taper.

All the basics you need.

This punch has a lightweight, knurled aluminum handle for a positive grip and easy handling. No hammer is required! Just hold the punch in an upright position, press the handle down, and a built-in mechanism strikes a perfect center mark every time. The force of the blow can be adjusted by turning the knurled cap. All working parts are made of tool steel, properly hardened. The hardened tool steel point can easily be removed for resharpening or replacement. Works on metal, plastics, wood and other machinable materials. Weight: 0.20 pounds

All the basics you need.

All the basics you need.

Save money with this set of four-flute HSS end mills. This set of 3/8” shank end mills includes: 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, and 3/8”

All the basics you need.

Ball endmills are used when you want to cut a rounded groove. Great for die makers. This set includes 1/8”, 3/16”, 1/4”, 5/16”, and 3/8” sizes with 3/8” shanks;7/16”, 1/2”, and 5/8” with 1/2” shanks; and 3/4” with a 3/4” shank.

none

These end mill adapters are the most secure way to hold your end mill. Bored to accept the exact shaft size of the end mill and secured with a set screw, end mills won't move or flex during your milling operation.

High speed steel cutter

High speed steel cutter

All the basics you need.

High speed steel cutter

Stay organized with this hanging collet rack. With holes for eight collets, this rack can either hang on your wall or mount to your workbench. 5C Collet rack shown. R8 rack holds 12 collets.

This 4 piece roughing end mill set lets you remove material quickly and effortlessly. Set includes 1/4”, 5/16”, 3/8” and 1/2” end mills with wooden stand.

If you’re doing a lot of tapping, speed-up the process with the Smithy self-feeding tapping head. At the same time, you’ll get a smoother and more accurate tap. Tapping head is self centering to compensate for .005” hole center misalignment. It mounts into the Smithy millhead with a standard arbor (arbor sold separately). Ultra-sensitive clutch prevents tap breakage. Includes two collets, break-rod and adjustment wrenches. Two sizes available, 46-550 #6-1/2” (3-12mm) capacity, recommended max speed 1500 RPM use with JT33 arbor, and 46-555 #10-3/4” (5-16mm) capacity, recommended max speed 1000 RPM use with JT3 arbor.

If you’re doing a lot of tapping, speed-up the process with the Smithy self-feeding tapping head. At the same time, you’ll get a smoother and more accurate tap. Tapping head is self centering to compensate for .005” hole center misalignment. It mounts into the Smithy millhead with a standard arbor (arbor sold separately). Ultra-sensitive clutch prevents tap breakage. Includes two collets, break-rod and adjustment wrenches. Two sizes available, 46-550 #6-1/2” (3-12mm) capacity, recommended max speed 1500 RPM use with JT33 arbor, and 46-555 #10-3/4” (5-16mm) capacity, recommended max speed 1000 RPM use with JT3 arbor.

COOLANT SYSTEM, CNC

COOLANT, SYNTHETIC OIL

If you are using a coolant system this is a must have. Direct your coolant right were it is needed with this magnetic coolant hose unit. Magnetic base has on and off switch for easy positioning.

Keep closer tolerances, get finer finishes and increase production and tool life while reducing costs. Ideal for all metals. One pint

Work quickly and extend the life of your tools. Powered by a fan-cooled thermally protected electric motor, this pump has a tank 9-1/4" H x 6" W and 12" L. Includes 4" cord, pump, noncorrosive tank, tubing and nozzle.

When tougher machining is required, reach for this coolant. Formula 77 coolant works great on any metal or alloy and meets the requirements of OSHA, NASA, AEC and the EPA. 1 Gallon size.