You are here
› Midas 3-in-1 Machine › FeaturesMidas Combo - Features
Power Feed Engage Handle
Position cutting tool, adjust speed and engage, as simple as that.
Mill/Drill Head Lock
Tightens mill head in desired position for rock solid milling and drilling.
Headstock Swivels 360 Degrees
Swing mill head out of the way when use lathe, swing back and lock to mill or drill.
7/16” T-Slot
Standard size t-slot for holding tools and workpieces.
Special Dovetail Ways
Patented inverted v-way provides accuracy and rigidity, ground and hardened for long-life and accuracy.
Lifting Handles
Convenient slide away lifting handles.
Belt Tension System
Release handle to loosen belt, engage handle to re-tension belt before operation. Allows for quick and easy speed changes.
Powerfeed Gearbox
Two speed gearbox provides a range of speed combinations to power leadscrew.
Table Locks
X and Y axis can both be locked down for solid milling results.
12 Speed Mill Head
Rugged design is also adaptable to a range of machining applications.
Three Jaw Chuck
Precision, self centering chuck comes standard with the machine.
Microfeed Handle
Engage microfeed clutch and rotate handle to perform operations that require microfeed measurements.
Offset Tailstock
Cut tapers on the lathe and adjust for super accuracy.
Floating Dials
Set starting points for threading and other functions.
- All the great features of the Midas 1220 XL - PLUS
- Extended Mill Head – 40% more milling capacity.
- Two Separate Motors – match the power to the job, 3/4HP lathe motor, 1/2HP mill/drill motor.
- Quick Changeover – 12” mill clearance allows room for both mill and lathe setups without removing the lathe chuck.
- Threading Dial and Half-Nut – cut and chase threads quickly and easily – and as accurately as a master machinist.
- Bi-Directional Power Feed – on both leadscrew and crossfeed assures fine finishes on both mill and lathe work.
- Rack & Pinion Feed on Carraige – quickly position your cutting tools and zip your carriage back and forth to speed your work.
Power Feed Engage Handle
position cutting tool, adjust speed and engage, as simple as that.
Mill/Drill Head Lock
tightens mill head in desired position for rock solid milling and drilling.
Headstock Swivels 360 Degrees
swing mill head out of the way when use lathe, swing back and lock to mill or drill.
7/16” T-Slot
Standard size t-slot for holding tools and workpieces.
Special Dovetail Ways
patented inverted v-way provides accuracy and rigidity, ground and hardened for long-life and accuracy.
Lifting Handles
convenient slide away lifting handles.
Belt Tension System
release handle to loosen belt, engage handle to re-tension belt before operation. Allows for quick and easy speed changes.
Powerfeed Gearbox
two speed gearbox provides a range of speed combinations to power leadscrew.
Table Locks
X and Y axis can both be locked down for solid milling results.
12 Speed Mill Head
Rugged design is also adaptable to a range of machining applications.
Three Jaw Chuck
precision, self centering chuck comes standard with the machine.
Microfeed Handle
engage microfeed clutch and rotate handle to perform operations that require microfeed measurements.
Offset Tailstock
cut tapers on the lathe and adjust for super accuracy.
Floating Dials
set starting points for threading and other functions.
- Adjustable Height Mill Head – Increase milling and drilling capacity by 33%.
- Larger Spindle Bore – accept up to 1” standard bar stock.
- Precision – repeatability to 0.001”.
- Large Work Table – 16.5” long table increase work area size by 80%. Cross slide screw is supported at both ends for greater accuracy.
- Rugged 12 Speed Mill Head – versatility, power, precision.
- Complete Thread Cutting – cut right hand, left hand, inch and metric threads like a master machinist.
- Compound-Angle Four-Turret Tool Post – allows you to cut angles and tapers, rotates 360 degrees.
- Compact Footprint – industrial quality machine shop that fits on your bench top.
